A AAAAB

Performance Rating

  • Summary - Rating: ASuitable for solar heat recovery systems using evacuated tube, flat-plate and thermodynamic solar-panels, where a non-toxic classification is preferred. More efficient and more durable than MPG based fluids.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: ACapable of providing freeze protection down to -50°C, subject to volume (concentration) used. Less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: AAll Solaris heat transfer fluids are formulated with extreme temperature rated reversibly-evaporisable inhibitors, which are suitable for evacuated tube, flat plate and thermodynamic solar panels.

  • Toxicity - Rating: AClassified as Non-Toxic. Suitable for systems where low-toxicity is stipulated or preferred.

Physical Properties

  • Density:1.02 - 1.15 g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers.

Mixing Guide

When measuring the percentage concentration of Solaris DTX® in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °C

v/v of Solaris DTX® %

Refractive Index

-10

25.0

1.36200

-15

30.0

1.36700

-20

35.0

1.37200

-25

40.0

1.37800

-30

45.0

1.38300